Blade type
Machine type
Material form
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Vapo HSS-Co5 (M35)
Vapo HSS-Co5 (M35)

Vapo HSS-Co5 (M35)

This process produces a layer of iron oxide (Fe3O4) on the blade surface which improves the sliding between cutting material and the blade.

COEFFICIENT OF FRICTION: 0,65

TiN HSS / DMo5 (M2)
TiN HSS / DMo5 (M2)

TiN HSS / DMo5 (M2)

The Titanium nitride coating gives to the blade a great surface hardness (2200-2400 HV), and allow it to work at cutting and feed speed faster than 50%.

COEFFICIENT OF FRICTION: 0,45

TiN HSS-Co5 (M35)
TiN HSS-Co5 (M35)

TiN HSS-Co5 (M35)

The Titanium nitride coating gives to the blade a great surface hardness (2200-2400 HV), and allow it to work at cutting and feed speed faster than 50%.

COEFFICIENT OF FRICTION: 0,45

TiCN HSS / DMo5 (M2)
TiCN HSS / DMo5 (M2)

TiCN HSS / DMo5 (M2)

Multi-layer coating with surface hardness of 3000-3300 HV and very low friction coefficient that allows cutting with an excellent finish. The great surface hardness of the blade allow to work with cutting speed 100% higher.

COEFFICIENT OF FRICTION: 0,21

TiCN HSS-Co5 (M35)
TiCN HSS-Co5 (M35)

TiCN HSS-Co5 (M35)

Multi-layer coating with surface hardness of 3000-3300 HV and very low friction coefficient that allows cutting with an excellent finish. The great surface hardness of the blade allow to work with cutting speed 100% higher.

COEFFICIENT OF FRICTION: 0,21

TiALN  HSS / DMo5 (M2)
TiALN  HSS / DMo5 (M2)

TiALN HSS / DMo5 (M2)

This coating (aluminium and titanium nitride) gives to the blade a surface hardness of 3400 HV, this allow to work with cutting and feed speed 60% higher. The low coefficient of friction allows the blade to be used with excellent results even in conditions of minimal lubrication.

COEFFICIENT OF FRICTION: 0,40

TiALN HSS-Co5 (M35)
TiALN HSS-Co5 (M35)

TiALN HSS-Co5 (M35)

This coating (aluminium and titanium nitride) gives to the blade a surface hardness of 3400 HV, this allow to work with cutting and feed speed 60% higher. The low coefficient of friction allows the blade to be used with excellent results even in conditions of minimal lubrication.

COEFFICIENT OF FRICTION: 0,40

Theros PSE
Theros PSE

Theros PSE

Silenced triple chip cutting edge with positive rake angle. Low noise execution filled with a special sound-absorbent material.

Theros NSE
Theros NSE

Theros NSE

Silenced triple chip cutting edge with negative rake angle. Low noise execution filled with a special sound-absorbent material.

Theros P
Theros P

Theros P

Triple chip cutting edge with positive rake angle.

Theros N
Theros N

Theros N

Triple chip cutting edge with negative rake angle.

Drycut
Drycut

Drycut

TCT Circular saw blades for dry cut on ferrous material without lubrication.