White HSS / DMo5 (M2)
Circular saw blade for generic use.
Vapo HSS / DMo5 (M2)
Circular saw blade for generic use.
This process produces a layer of iron oxide (Fe3O4) on the blade surface which improves the sliding between cutting material and the blade.
COEFFICIENT OF FRICTION: 0,65
Vapo HSS-Co5 (M35)
This process produces a layer of iron oxide (Fe3O4) on the blade surface which improves the sliding between cutting material and the blade.
COEFFICIENT OF FRICTION: 0,65
TiN HSS / DMo5 (M2)
The Titanium nitride coating gives to the blade a great surface hardness (2200-2400 HV), and allow it to work at cutting and feed speed faster than 50%.
COEFFICIENT OF FRICTION: 0,45
TiN HSS-Co5 (M35)
The Titanium nitride coating gives to the blade a great surface hardness (2200-2400 HV), and allow it to work at cutting and feed speed faster than 50%.
COEFFICIENT OF FRICTION: 0,45
TiCN HSS / DMo5 (M2)
Multi-layer coating with surface hardness of 3000-3300 HV and very low friction coefficient that allows cutting with an excellent finish.
The great surface hardness of the blade allow to work with cutting speed 100% higher.
COEFFICIENT OF FRICTION: 0,21
TiCN HSS-Co5 (M35)
Multi-layer coating with surface hardness of 3000-3300 HV and very low friction coefficient that allows cutting with an excellent finish.
The great surface hardness of the blade allow to work with cutting speed 100% higher.
COEFFICIENT OF FRICTION: 0,21
TiALN HSS / DMo5 (M2)
This coating (aluminium and titanium nitride) gives to the blade a surface hardness of 3400 HV, this allow to work with cutting and feed speed 60% higher.
The low coefficient of friction allows the blade to be used with excellent results even in conditions of minimal lubrication.
COEFFICIENT OF FRICTION: 0,40
TiALN HSS-Co5 (M35)
This coating (aluminium and titanium nitride) gives to the blade a surface hardness of 3400 HV, this allow to work with cutting and feed speed 60% higher.
The low coefficient of friction allows the blade to be used with excellent results even in conditions of minimal lubrication.
COEFFICIENT OF FRICTION: 0,40